150W 200V 20A Adjustable USB Electronic Load Tester - Battery Capacity Tester Module for Lithium, Li-ion, NiMH, Lead Acid Batteries - Perfect for DIY Electronics, RC Vehicles, and Solar Power Testing

Specification: Input Interface / Output Interface: 100A High Current Bite Screw Stud Voltage measurement range: 0.00V ~ 200V, Resolution accuracy: 0.01V Current measurement range: 0.00A ~ 20A, Resolution accuracy: 0.01A Capacity accumulation range: 0 ~ 999.999Ah, Resolution accuracy: 0.01Ah Power accumulation range: 0 ~ 9999.9Wh, Resolution accuracy: 0.01Wh Power measurement range: 0000.00 ~ 150W, Resolution accuracy: 0.01W Impedance measurement range: 1 ~ 999.9Ω, Resolution accuracy: 0.01 Ω Temperature measurement range: 0 ~ 99 ℃, Resolution accuracy: 1 ℃ Timing maximum time: 999 hours 59 minutes 59 seconds, Resolution accuracy: 1 second Timing measurement reminder settings: countdown 24 hours, any value can be set Small current standby to remind the threshold parameters and timing: 0.5W begin timing Power supply: 4 ~ 30V range of voltage Refresh time: > 500mS / times Measurement rate: about 0.5 times / sec Over voltage Over current Set the alarm mode: Show alert interface to remind the user Note: 1. Please turn down the knob to the end counterclockwise before using, and then turn up slowly. 2. Please pay attention to your safety when the voltage is more than 36V. 3. Several tested power supply can not be connected simultaneously. 4. The current adjustment knob should be regulated slowly. Package Include: 1 x Adjustable Constant Current Electronic Load 1 x 2 x Clip 1 x USB Clip (Other items in the picture are NOT included)

SAFE USE This Battery Capacity Tester, LCD screen, display information comprehensively and clearly. The CPU fan can effectively dissipate the heat. Configuration of intelligent fan, which can dissipate the heat effectively and quietly. Load maximum power 150W, maximum voltage 200V, maximum current 20A. Over voltage, over current, and over pressure alarm can protect the module from damage effectively.

USB LOAD TESTER This multifunction constant current electronic load can measure voltage, current, power, battery capacity, impedance, temperature, energy, time. Test various batteries, power supply, and charging data lines.

ELECTRONIC LOAD TESTER Voltage measurement range 0.00V ~ 200V, Resolution accuracy 0.01V. Current measurement range 0.00A ~ 20A, Resolution accuracy 0.01A. Refresh time > 500mS / times Measurement rate about 0.5 times / sec.

OVER VOLTAGE OVER CURRENT SET THE ALARM MODE Show alert interface to remind the user. Overpressure Reminder Setting range 1 ~ 200V. Low voltage reminder setting range 0 ~ 190V. Overflow Reminder Set Range 0.2 ~ 100A.

NOTE Please turn down the knob to the end counterclockwise before using, and then turn up slowly. Please pay attention to your safety when the voltage is more than 36V. Several tested power supply can not be connected simultaneously. The current adjustment knob should be regulated slowly.